CÔNG TY TNHH CÔNG NGHỆ ZIITEK VIỆT NAM
VIETNAM ZIITEK TECHNOLOGY CO.,LTD Vietnam Ziitek Technology Company Limited
Add to Cart
Z-Paster100-30-10F Silicone Free Thermal Pad Thermal Conductive Gap Fillers For Charging Pile
Z-PasterTM100-30-10UF Series is a high performance and compatible non-silicone material of the thermal conductive interface materials. The role is to fill the air gaps between the heating elements and the heat dissipation fins or the metal base. lt applies to the liner based on silicone suitably. The flexibility and elasticity make it suited to the coating of the very uneven surfaces.Heat can transmit to the metal housing or dissipation plate from the separate elements or even the entire PCB, which in effect enhances the efficiency and life-time of the heat-generating electronic components.
Features
> Silicone-free
> Meets ROSH standards
> Good thermal conductive: 3.0 W/mK
> Available in varies thickness
> Soft and Compressible for low stress applications
Application
> Cooling components to the chassis of frame
> Car Battery & Power Supply
> Charging Pile
> Silicone-sensitive applications
> Graphics Card Thermal Module
> Set Top Box
> Medical devices
> LED
> SFP optical module
> Miniature heat tube radiator
| Typical Properties of Z-Paster 100-30-10F Series | |||||
| Color | Gray | Visual | Dielectric Breakdown Voltage (T= 1mm above) | >5000 VAC | ASTM D150 |
| Construction | Silicone-free The metal oxide fills | ******* | Dielectric Constant | 5.5 MHz | ASTM D150 |
| Thermal Conductivity | 3.0W/mK | ASTM D5470 | Volume Resistivity | 6.0X1013 Ohm-meter | ASTM D257 |
| Hardness | 65 Shore 00 | ASTM 2240 | Continuous Use Temp | –20 To 125℃ | ******** |
| Specific Gravity | 2.88g/cc | ASTM D297 | Outgassing (TML) | 0.30% | ASTM E595 |
| Thickness range | 0.020"-0.200" (0.5mm-5.0mm) | ASTM D374 | Flame Rating | 94 V0 | equivalent to |
Standard Thicknesses
0.020-inch to 0.200-inch (0.5mm to 5.0mm)
Company Profile
Ziitek company is a manufacturer of thermal conductive gap fillers, low melting point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products, with well-equipped testing equipment and strong technical force.
Packaging Details & Lead time
The packaging of silicone free thermal pad
1.with PET film or foam-for protection
2. use Paper Card To Separate Each Layer
3. export carton inside and outside
4. meet with customers' requirement-customized
Lead Time :Quantity(Pieces):5000
Est. Time(days): To be negotiated
Certifications:
ISO9001:2015
ISO14001: 2004 IATF16949:2016
IECQ QC 080000:2017
UL
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in Vietnam.
Q: Do you offer free samples ?
A: Yes, we are willing to offer free sample.
Q: How do I place an order?
A:1. Click the "Sent messages" button to continue with the process.
2. Fill out the message form by entering a subject line, and message to us.
This message should include any questions you might have about the products as well as your purchase requests.
3. Click the "Send" button when you are finished to complete the process and send your message to us
4. We will reply you as soon as possible with Email or online
Q: How do I request customized samples?
A: To request samples, you can leave us message on website, or just contact us by send email or call us.